top of page

Booty Bondage v3

split 2.jpg

This version of Booty Bondage was created when a friend of ours asked for a butt tie that would give her some 'uplift'. As with all of our ties, it has evolved since its first creation and it now features a decorative asymmetric front weave.

​

This tutorial is designed to accompany our video on YouTube. Link is here

​

This is a decorative tie only and is NOT suitable for suspension. This tie can be used to practice your rope handling technique and tension control whilst also creating some fabulous rope bulges! This tie does use a number of munter hitches - there are lots of tutorials available on YouTube so we haven't demonstrated it here. 

​

Don't worry if you struggle, just create your own version and use frictions and techniques that you know. Yours doesn't have to look exactly like ours, the main thing is to just enjoy yourself whether you are tying your rope partner or yourself. Use the natural curves of the body and let the rope guide you as to the best placement.

​

collage 1.jpg

We used two to three 30ft lengths of KnotHead Nylon to complete the tie. The rope has been doubled so that you have a bight (a loop) at one end and two tails at the running end.

​

  • Create a larks head around the left thigh by passing the running end through the bight, placing the rope directly underneath the curve of the butt cheek at the rear - remember - this tie is to provide uplift, so give it a helping hand!

​

  • Pass the running end diagonally across the front of the body, keeping it low on the hips, passing it horizontally across the back and return to the front of the body.

​

  • Pass the rope diagonally across the front of the body towards the outer edge of the right thigh. Wrap the rope around the back of the right thigh, again, getting that rope right into the curve of the right butt cheek.

​

  • Bring the rope between the legs from the back to the front and tie a munter hitch as indicated.

​

  • Pass the rope over the right hip, and place it above the previous horizontal wrap around the body. Don't worry if you think this rope will slip - you are going to 'catch' it with your next friction. Just try and maintain tension as you pass your rope from front to back and to front again.

​

  • Pass your rope under the two diagonals, but remain above the munter hitch you tied earlier. Now reverse your rope and go back towards the left hip. You have just created a reverse friction and you should now have tensioned any slack ropes you might have had at the front.

collage 2.jpg
  • Pass your rope around the back of the body, creating a third horizontal wrap, higher than the previous one. The gap between each wrap will all depend on the size of your model so don't worry if they don't look like ours - our friend was 6ft tall!

​

  • Now begins the fun part...the weaving element. Go over, under, over, under the four diagonal wraps and then between the legs. It's up to you how tight you have this rope and where you might want to place it around the crotch area!! 

​

  • Tie a munter hitch diagonally up the back on each friction, working towards the right hip. Pass the rope to the front seating it directly above the highest horizontal wrap.

​

  • More weaving yey!! Now this time, go under, over, under, over, then through the legs to the rear, ensuring your rope is placed comfortably (or not!) in the crotch area.

​

collage 3.jpg
  • As before, tie a munter hitch on each of the horizontal wraps, but this time working diagonally towards the left hip.

​

  • Again, pass the rope to the front, seating it directly above the highest horizontal wrap.

​

  • Lots more weaving this time!! Pass the rope as indicated, under, over, under, over working on the right hand side, before changing direction and passing your rope to the left going over, under, over, under and then finish off your tie with a locking friction of your choosing.

​

  • Tuck your end away, or use up any excess in further weaves or wraps down the thigh.

​

Shake that booty and enjoy! 

bottom of page